Flexible Transmission Network Planning Considering the Impacts of Distributed Generation

The restructuring of global power industries has introduced a number of challenges, such as conflicting planning objectives and increasing uncertainties,to transmission network planners. During the recent past, a number of distributed generation technologies also reached a stage allowing large scale implementation, which will profoundly influence the power industry, as well as the practice of transmission network expansion. In the new market environment, new approaches are needed to meet the above challenges. In this paper, a market simulation based method is employed to assess the economical attractiveness of different generation technologies, based on which future scenarios of generation expansion can be formed. A multi-objective optimization model for transmission expansion planning is then presented. A novel approach is proposed to select transmission expansion plans that are flexible given the uncertainties of generation expansion, system load and other market variables. Comprehensive case studies will be conducted to investigate the performance of our approach. In addition, the proposed method will be employed to study the impacts of distributed generation, especially on transmission expansion planning.

Investigating the Impacts of Distributed Generation on Transmission Expansion Cost: An Australian Case Study

Distributed generation (DG) is rapidly increasing its penetration level in Australia, and is expected to play a more important role in the power industry. An important benefit of DG is its ability to defer transmission investments. In this paper, a simulation model is implemented to conduct quantitative analysis on the effect of DG on transmission investment deferral. The transmission expansion model is formulated as a multi-objective optimization problem with comprehensive technical constraints, such as AC power flow and system security. The model is then applied to study the Queensland electricity market in Australia. Simulation results show that, DG does show the ability to reduce transmission investments. This ability however is greatly influenced by a number of factors, such as the locations of DG, the network topology, and the power system technical constraints.

Superior thermal conductivity and extremely high mechanical strength in polyethylene chains from {\it ab initio} calculation

The upper limit of the thermal conductivity and the mechanical strength are predicted for the polyethylene chain, by performing the {\it ab initio} calculation and applying the quantum mechanical non-equilibrium Green's function approach. Specially, there are two main findings from our calculation: (1). the thermal conductivity can reach a high value of 310 W/K/m in a 100 nm polyethylene chain at room temperature; (2). the Young's modulus in the polyethylene chain is as high as 374.5 GPa, and the polyethylene chain can sustain $32.85$ (ultimate) strain before undergoing structural phase transition into gaseous ethylene.Comment: published in J. Appl. Phys. (2012

A comparative study of two molecular mechanics models based on harmonic potentials

We show that the two molecular mechanics models, the stick-spiral and the beam models, predict considerably different mechanical properties of materials based on energy equivalence. The difference between the two models is independent of the materials since all parameters of the beam model are obtained from the harmonic potentials. We demonstrate this difference for finite width graphene nanoribbons and a single polyethylene chain comparing results of the molecular dynamics (MD) simulations with harmonic potentials and the finite element method with the beam model. We also find that the difference strongly depends on the loading modes, chirality and width of the graphene nanoribbons, and it increases with decreasing width of the nanoribbons under pure bending condition. The maximum difference of the predicted mechanical properties using the two models can exceed 300% in different loading modes. Comparing the two models with the MD results of AIREBO potential, we find that the stick-spiral model overestimates and the beam model underestimates the mechanical properties in narrow armchair graphene nanoribbons under pure bending condition.Comment: 40 pages, 21 figure

Market and Economic Modelling of the Intelligent Grid: End of Year Report 2009

The overall goal of Project 2 has been to provide a comprehensive understanding of the impacts of distributed energy (DG) on the Australian Electricity System. The research team at the UQ Energy Economics and Management Group (EEMG) has constructed a variety of sophisticated models to analyse the various impacts of significant increases in DG. These models stress that the spatial configuration of the grid really matters - this has tended to be neglected in economic discussions of the costs of DG relative to conventional, centralized power generation. The modelling also makes it clear that efficient storage systems will often be critical in solving transient stability problems on the grid as we move to the greater provision of renewable DG. We show that DG can help to defer of transmission investments in certain conditions. The existing grid structure was constructed with different priorities in mind and we show that its replacement can come at a prohibitive cost unless the capability of the local grid to accommodate DG is assessed very carefully.Distributed Generation. Energy Economics, Electricity Markets, Renewable Energy

Group II Intron Protein Localization and Insertion Sites Are Affected by Polyphosphate

Mobile group II introns consist of a catalytic intron RNA and an intron-encoded protein with reverse transcriptase activity, which act together in a ribonucleoprotein particle to promote DNA integration during intron mobility. Previously, we found that the Lactococcus lactis Ll.LtrB intron-encoded protein (LtrA) expressed alone or with the intron RNA to form ribonucleoprotein particles localizes to bacterial cellular poles, potentially accounting for the intron's preferential insertion in the oriC and ter regions of the Escherichia coli chromosome. Here, by using cell microarrays and automated fluorescence microscopy to screen a transposon-insertion library, we identified five E. coli genes (gppA, uhpT, wcaK, ynbC, and zntR) whose disruption results in both an increased proportion of cells with more diffuse LtrA localization and a more uniform genomic distribution of Ll.LtrB-insertion sites. Surprisingly, we find that a common factor affecting LtrA localization in these and other disruptants is the accumulation of intracellular polyphosphate, which appears to bind LtrA and other basic proteins and delocalize them away from the poles. Our findings show that the intracellular localization of a group II intron-encoded protein is a major determinant of insertion-site preference. More generally, our results suggest that polyphosphate accumulation may provide a means of localizing proteins to different sites of action during cellular stress or entry into stationary phase, with potentially wide physiological consequences.This work was supported by National Institutes of Health R01 grants GM037949 to AML and GM076536 to EMM, Welch Foundation grants F-1607 to AML and F-1515 to EMM, and a Packard Foundation fellowship to EMM.Cellular and Molecular Biolog

Market and Economic Modelling of the Intelligent Grid: Interim Report 2011

The overall goal of Project 2 has been to provide a comprehensive understanding of the impacts of distributed energy (DG) on the Australian Electricity System. The research team at the UQ Energy Economics and Management Group (EEMG) has constructed a variety of sophisticated models to analyse the various impacts of significant increases in DG. These models stress that the spatial configuration of the grid really matters - this has tended to be neglected in economic discussions of the costs of DG relative to conventional, centralized power generation. The modelling also makes it clear that efficient storage systems will often be critical in solving transient stability problems on the grid as we move to the greater provision of renewable DG. We show that DG can help to defer of transmission investments in certain conditions. The existing grid structure was constructed with different priorities in mind and we show that its replacement can come at a prohibitive cost unless the capability of the local grid to accommodate DG is assessed very carefully.Distributed Generation. Energy Economics, Electricity Markets, Renewable Energy